Door Hinges. Saturday , September 09th , 2017 - 11:07:36 AM
When it comes to cabinet door hinges the right ones depend on the type of door you have. Basically there are three types of doors lipped, overlay and flush. The lipped door is one in which a lip has been cut completely around the door. The overlay door is cut larger than the opening so that its edges rest on the door frame. Flush doors sit inside the frame with their faces flush within it. Each type of door dictates different types of hinges. Pivot hinges, one of the most popular styles, are designed for overlay doors. One hinge is mounted on top the other on the bottom with portions of each screwed into the frame resulting in a concealed hinge.
Similar to the butt hinge but used only on flush doors; doors that rest within the frame, are butterfly hinges. These cabinet door hinges are also constructed with two flaps with screw holes held together by a pin. The difference is these hinges are mounted on the outside of the door and frame giving your cabinet a decorative touch. They are available in several styles to suit your taste ranging from colonial to art deco and more.
If you are replacing three-hole door hinges, you should start by putting in the middle screw first, then put in the bottom screw. Finally you should put in the top screw. If you repeat this on both the top and bottom of a cabinet door you will be able to keep your door in alignment. If you have two-hole door hinges things can get a little trickier. The easiest way to do them is to have someone help you. Their job will be to hold the door in place while you put the screws in. You can also balance the door on something while you put the screws in. But, this can be a little frustrating if the door moves or shifts before you get both screws in place.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ShirtsTasteGood claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.