Lucille. Door Hinges. June 09th , 2017.
If you are replacing three-hole door hinges, you should start by putting in the middle screw first, then put in the bottom screw. Finally you should put in the top screw. If you repeat this on both the top and bottom of a cabinet door you will be able to keep your door in alignment. If you have two-hole door hinges things can get a little trickier. The easiest way to do them is to have someone help you. Their job will be to hold the door in place while you put the screws in. You can also balance the door on something while you put the screws in. But, this can be a little frustrating if the door moves or shifts before you get both screws in place.
You should put the first screw in at this point, at the top of the door. Make sure someone is holding up the weight of the door (or keep it on shims) so the weight doesnt pull that screw out. Close the door and make sure it shuts properly. It should be hitting the strike plate evenly. If not, adjust the shim placement until you have even amounts of space all the way around and the door seems to be evenly set. Immediately put a screw in the bottom door hinges. This will make sure you have the door hinges lined up in a manner that will allow the door to open and close correctly.
For something a little more European, consider adding Antique English Hinges. These H shaped steel cabinet door hinges have a very ornate finish to them that will add old world charm to your kitchen, bathroom or pantry area. Ornamental hinges are another good choice for visible, or surface mounted cabinet door hinges. These come in a wide range of styles, including butterfly and Art Deco. When selecting new hinges, you want to keep a few things in mind. First, whats the style of your kitchen? Is it modern, traditional, country or retro? What kind do you have now and what hinges would not only look good, but also properly support the door so it doesnt sag or even fail over the time. Too weak of hinges and youll always be straightening the door. This can become maddening very quickly.
Geared continuous hinges are most often found in steel or aluminum. Lighter weight continuous piano hinges are often made of brass. The heavy duty commercial hinges distribute weight and stress along the full length of door and frame, thus preventing misaligned pivot points of individual hinges. Buyers should look for high quality hinges from well-known manufacturers. Cheaper products provide inferior performance and will require repair and replacement long before a higher grade hinge. Companies such as Stanley even provide a limited lifetime warranty on their commercial grade door hinges.
If you have an overlay door you will need pivot hinges. One is attached to the top and the other to the bottom of a door, and portions of each are recessed into the door and frame creating a concealed hinge. Flush doors commonly use butterfly hinges. These hinges are so named because they look like a butterfly when opened. They consist of two flaps with screw holes held together by a pin. They mount on the outside of the door and jamb or frame for a unique decorative look. Youll find them in multiple styles ranging from colonial to art deco and beyond to suit your personal taste.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ShirtsTasteGood claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.