Door Hinges. Wednesday , September 13th , 2017 - 08:05:13 AM
When it comes to cabinet door hinges the right ones depend on the type of door you have. Basically there are three types of doors lipped, overlay and flush. The lipped door is one in which a lip has been cut completely around the door. The overlay door is cut larger than the opening so that its edges rest on the door frame. Flush doors sit inside the frame with their faces flush within it. Each type of door dictates different types of hinges. Pivot hinges, one of the most popular styles, are designed for overlay doors. One hinge is mounted on top the other on the bottom with portions of each screwed into the frame resulting in a concealed hinge.
Another way to tell if it is a good idea to replace your doors with pre-hung replacements is if the rest of the doors already cant in their frames. You can square them yourself, but if you are planning to replace these doors, go for the pre-hung. They take much less time to replace and come in pre-finished or raw wood. One last thing, is your door a left- or right-hanging door? Hmmm...you think for a minute. Nope, you are sure you havent heard that one. Dont worry its easy. When you are buying any type of hinged door; storm door, entry door, and even cabinet doors, OR when you are buying hinged door hardware; hinges especially and sometimes latches, the salesperson will eventually ask you whether it is a right- or left-hanging door. The way you figure it out is, when you pull open the door; does it open to your left or to your right? Whichever way it opens is the answer.
If you are replacing three-hole door hinges, you should start by putting in the middle screw first, then put in the bottom screw. Finally you should put in the top screw. If you repeat this on both the top and bottom of a cabinet door you will be able to keep your door in alignment. If you have two-hole door hinges things can get a little trickier. The easiest way to do them is to have someone help you. Their job will be to hold the door in place while you put the screws in. You can also balance the door on something while you put the screws in. But, this can be a little frustrating if the door moves or shifts before you get both screws in place.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ShirtsTasteGood claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.