Lucille. Door Hinges. September 29th , 2017.
Most doors today are sold pre-hung, with hinges on them, when you get a new door it usually comes with factory standard door hinges. If you are remodeling you want to make sure the new door hinges fit the style of all the other ones in the house. Thankfully they are easy to swap out. The holes for door hinges are usually standard as long as you buy the same size that you had previously. The door hinges you have will likely have either two or three holes. How you change the door hinges depends on which style you have.
If you have an overlay door you will need pivot hinges. One is attached to the top and the other to the bottom of a door, and portions of each are recessed into the door and frame creating a concealed hinge. Flush doors commonly use butterfly hinges. These hinges are so named because they look like a butterfly when opened. They consist of two flaps with screw holes held together by a pin. They mount on the outside of the door and jamb or frame for a unique decorative look. Youll find them in multiple styles ranging from colonial to art deco and beyond to suit your personal taste.
If you are replacing three-hole door hinges, you should start by putting in the middle screw first, then put in the bottom screw. Finally you should put in the top screw. If you repeat this on both the top and bottom of a cabinet door you will be able to keep your door in alignment. If you have two-hole door hinges things can get a little trickier. The easiest way to do them is to have someone help you. Their job will be to hold the door in place while you put the screws in. You can also balance the door on something while you put the screws in. But, this can be a little frustrating if the door moves or shifts before you get both screws in place.
Theyre small and inconspicuous, but they really hold a room together. No they are not throw pillows or candles. They are door hinges and they are in every room of your house. From the refrigerator to the cellar door you use them every day. Sure you dont really think about them, but can you imagine what life would be like without them? Your front door might be a large rock or chunk of wood. Or if you are not strong enough to move one of those you would climb a ladder and enter your home through the roof.
You should put the first screw in at this point, at the top of the door. Make sure someone is holding up the weight of the door (or keep it on shims) so the weight doesnt pull that screw out. Close the door and make sure it shuts properly. It should be hitting the strike plate evenly. If not, adjust the shim placement until you have even amounts of space all the way around and the door seems to be evenly set. Immediately put a screw in the bottom door hinges. This will make sure you have the door hinges lined up in a manner that will allow the door to open and close correctly.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ShirtsTasteGood claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.