Garage Doors. Thursday , October 12th , 2017 - 01:11:57 AM
In response to the inherently dangerous old style garage spring issues as above, a newer and safer system for opening the overhead garage door was created. The idea was to transfer the load or weight of the door via a cable and pulley system to a vertical rod now equipped with a torsion (twisted) spring. This type of spring is installed with specialty hardware and bolts to a fixed plate at one end, while the entire spring is installed around a horizontal pipe. This load balancing device is normally installed directly over the header of the garage opening. Using appropriate cables, connectors and pulleys, the weight of the garage door is transferred into the torsion spring system. The difference between the old style stretched spring and the newer torsion spring is the way that the spring energy is stored. With the old style stretched spring, the energy is stored and released by pulling on the spring or returning the spring to its un-stretched condition.
Wayne Dalton, established in 1954, is the producer and supplier of the safest residential and commercial garage doors and garage door openers in the US. Wayne Dalton supplies two kinds of garage door openers: wall mount and ceiling mount. The wall mount openers, an exclusive product from Wayne Dalton, can be mounted on the wall beside the door. This helps to eliminate the chains, belts, screw drive and tract that usually clutter the garage ceiling. This model also helps to eliminate noise and vibration to a large extent.
In contrast to an overhead type of garage door, be it sectional or single panel, roll up doors have a totally different type of operating system. When these doors are used, they can be concealed in an overhead or under mounted trough. These doors operate similarly to a roll top desk door except for how they are stored when not in the closed position. They normally coil as they are retracted, and require significant gear trains to reduce the effort required to move these doors up and down into position. Often the forces needed to move these roll up doors require a reduction type of transmission that allows a very heavy door to be operated effortlessly.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ShirtsTasteGood claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.