Emmeline. Door Hinges. September 28th , 2017.
If you have concealed hinges and want to move to surface mounted cabinet hinges, chances are good that youll want to go with either semi-concealed hinges where only the frame wing is visible (the door part goes on the back side of the cabinet door), overlay hinges, or inset hinges. It just depends on the type cabinet doors you have. Before you redo all your hinges buy several different styles and finishes and put them on them in various parts of the kitchen. You can then get a sense of which works best for you from the standpoint of design and décor before going through the effort of replacing all the cabinet door hinges in the home.
When it comes to cabinet door hinges the right ones depend on the type of door you have. Basically there are three types of doors lipped, overlay and flush. The lipped door is one in which a lip has been cut completely around the door. The overlay door is cut larger than the opening so that its edges rest on the door frame. Flush doors sit inside the frame with their faces flush within it. Each type of door dictates different types of hinges. Pivot hinges, one of the most popular styles, are designed for overlay doors. One hinge is mounted on top the other on the bottom with portions of each screwed into the frame resulting in a concealed hinge.
Door hinges are one of the most vital parts of home architecture, yet they have been taken for granted by us. If it werent for hinges, then opening your doors, cabinets and car doors would become a hassle. Door hinges may have been invisible to you throughout your lifetime but after reading this article, you might want to give them some serious thought. Without door hinges, a mere act of going to the bathroom would require so much effort, that you want to go to open the door well in advance, as opening and closing of the door would be a painstaking task.
You should put the first screw in at this point, at the top of the door. Make sure someone is holding up the weight of the door (or keep it on shims) so the weight doesnt pull that screw out. Close the door and make sure it shuts properly. It should be hitting the strike plate evenly. If not, adjust the shim placement until you have even amounts of space all the way around and the door seems to be evenly set. Immediately put a screw in the bottom door hinges. This will make sure you have the door hinges lined up in a manner that will allow the door to open and close correctly.
If you dont want to see the hinge at all you can try a Soss hinge. These door hinges are commonly used on folding doors. Both sides are recessed into the door so it is completely concealed. One of the most popular of door hinges is the spring loaded or self-closing hinge because when mounted the door will close on its own. This type of door hinge is extremely popular in kitchens because people are frequently opening and closing cabinets. Once you choose your type of hinge you can choose the finish that will really bring your room together. Select from chrome, brass, bronze or nickel all in polished, brushed, antiqued or oil rubbed forms and match your hinges and cabinet knobs. Never underestimate the strength of door hinges or their ability to finish the look of a room.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ShirtsTasteGood claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.