Jeanette. Door Hinges. October 02nd , 2017.
You should put the first screw in at this point, at the top of the door. Make sure someone is holding up the weight of the door (or keep it on shims) so the weight doesnt pull that screw out. Close the door and make sure it shuts properly. It should be hitting the strike plate evenly. If not, adjust the shim placement until you have even amounts of space all the way around and the door seems to be evenly set. Immediately put a screw in the bottom door hinges. This will make sure you have the door hinges lined up in a manner that will allow the door to open and close correctly.
No matter what type of door is being installed, a hinge of some type is necessary. Hinge designs include butt hinges, spring hinges, geared continuous hinges and a myriad of utility hinge designs. Which one you purchase depends on the location and function of the door. A quality hinge provides long-lasting functionality which saves in repair costs and time. Although steel is one of the most common materials for hinges, they can also be manufactured from brass, bronze or aluminum. However, even when the hinge is constructed of brass or bronze, the pins on a high-quality hinge are still manufactured from steel for increased durability. In addition, hinges designed for the heaviest of doors and highest usage typically are only made in steel due to its strength and durability.
If you have concealed hinges and want to move to surface mounted cabinet hinges, chances are good that youll want to go with either semi-concealed hinges where only the frame wing is visible (the door part goes on the back side of the cabinet door), overlay hinges, or inset hinges. It just depends on the type cabinet doors you have. Before you redo all your hinges buy several different styles and finishes and put them on them in various parts of the kitchen. You can then get a sense of which works best for you from the standpoint of design and décor before going through the effort of replacing all the cabinet door hinges in the home.
When you are shopping for door hinges to use, you may find yourself marveling at all the designs on the market, but you need to keep a few details in mind. There are two choices in door hinges - removable pin or fixed pin. Which one you want will depend on if you ever need to take the door off. Removable pin doors allow you pop the door down should you need to do something like move a piece of furniture through a doorway that is a little too skinny for the furniture pieces. Also make sure to look at how your door hinges are currently constructed and that any bolt on the new door hinges wont interfere with your molding.
There are several types of door hinge available. The most common is the butt hinge. This consists of two flaps with screw holes attached by a pin or a rod. To take the door down all you would have to do is remove the pins. You can choose to add finials or balls to the pins for a decorative touch. Garage doors are usually attached with T-hinges. Shaped like the letter T the horizontal part is attached to the door frame while the vertical part is attached to the door. These hinges can be plain or ornamental and lift up rather than out. If you have folding doors you might use a Soss hinge. Named for its inventor this door hinge is recessed into the door edges so when the door is folded it is completely concealed. It must be installed exactly or it will not work.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ShirtsTasteGood claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.